Showing 37–48 of 74 results
-

2,220.00 د.إ, excl. 5% VATThis product is designed to ensure your DC electrical distribution system on boats and specialist vehicles is both very safe and compact. The clear plastic cover makes it easy to see the green LEDs indicating live circuits and the red LEDs indicating failed circuits. In the event of concerns about excess power being used by the LEDs a simple link can be removed to kill all the green LEDs (that would otherwise be on all the time) but leave the red (fuse blown warning) LEDs active (but only on in
-

1,134.00 د.إ, excl. 5% VATAutomatic, High Voltage Protection Device, with unit stop and extra information transmit port. For protecting equipment from generator / inverter over voltage failure. 30 Amp model suitable for direct use with up to 6KVA generators. Unlimited gen set / inverter capacity available if used with external indirect contactor. What does this product do and why do I need it? Generators, Inverters, the mains supply, or, any device which produces 230V AC, can and will, at some point, fail or have the inc
-

285.10 د.إ – 475.20 د.إPrice range: 285.10 د.إ through 475.20 د.إ, excl. 5% VATInstruction Manual PDF Product Information Pro connect ignition / signal feed relay DC Voltage Amps Size L x W x D mm Weight Kg Part Number 12 80 140 x 60 x 40 0.25 IFR1280 12 160 140 x 70 x 40 0.30 IFR12160 12 240 140 x 80 x 40 0.30 IFR12240 24 50 140 x 60 x 40 0.25 IFR2450 24 100 140 x 70 x 40 0.30 IFR24100 24 150 140 x 80 x 40 0.30 IFR24150 Ignition feed/D+/signal feed relay: This range of low cost low signal activated relays is the simplest in the range, it offers the ability to link togethe
-

54.00 د.إ – 1,776.00 د.إPrice range: 54.00 د.إ through 1,776.00 د.إ, excl. 5% VATELB160-240A Instructions ELB480-640A Instructions Product Information PDF Electrical Battery Isolator Specifications: 12V model operates down to 8V, 24V models down to 16V Totally isolated switching voltage from control voltage All models are continuous current related Off power consumption = 0.000A On power consumption 1.5mA – 0.0015A LED consumption Switching power about 2A for 0.5 seconds Continuous Rating 5 Sec 30 Sec Starter Rated Size L x W x D mm Weight Kg Power Con Control Voltage Part N
-

Price on requestInstruction Manual PDF Product Information PDF Pro Latch R Suitable for use as one of the following: 1) Split charger ( VSR ) relay / uni + bidirectional 2) Battery protect relay ( over discharge and over charge ) 3) Engine Start Protect relay Why a latching relay over a conventional relay? A conventional relay (such as ones used in cars to switch on your lights or control power distribution on boats etc.) These are by far the most common forms of relays produced, they are very reliable and rela
-

Price on request2015 English 2015 German Optional remote control for Pro Latch R – features include: LCD displays can be selected to show input voltage or output voltage. Other alarms/information displayed via LEDs would be: High voltage trip alarm (showing if fault on input or output) alarm set at 16V (x 2 for 24V), Relay engaged or disengaged – Emergency override function (hold select button for 5 sec to give 1 min override) – Audible alarm function disengage (especially boat or camper vans would not want ala
-

498.00 د.إ – 1,080.00 د.إPrice range: 498.00 د.إ through 1,080.00 د.إ, excl. 5% VATInstruction Manual PDF Product Information PDF German Instructions PDF Pro Charge Ultra Lite Multi stage | Fully Active PFC | Custom Charge Selection | 12V 30A | 2 outputs Global Voltage 80-270VAC 40-70Hz (minor power reduction when AC voltage drops below 100VAC) This new Pro charge Ultra Lite is aimed at the budget sensitive market. A common question shall be, what are the key differences between the Ultra and the Ultra Lite?: 1) The Ultra is larger due to it meeting the ABYC 40 Deg C+ high amb
-

116.40 د.إ – 285.60 د.إPrice range: 116.40 د.إ through 285.60 د.إ, excl. 5% VATNew Ring Connector Type Product Part Number Description Footprint GMFBR 4 x holder for RESET FUSE and ATQ fuse range, Buss bar link included 148mm x 110mm GFBR 4 x holder for AUE and AUEL fuse range, buss bar link included 148mm x 110mm GANLR Fuse holder with ring terminals for GANL fuse, same as GANL1 but suitable for ring terminal fitting fuse type ANL 90mm x 60mm GPBR Solid connector block with ring terminal connectors. Solid block ring 100mm x 60mm All products are precision machined from so
-

3,495.00 د.إ, excl. 5% VATSterling Power – Pro Combi S 12V 3500W – Brand New in Box Product Code PCS123500 Input Voltage (AC) 190-260 V (230V nominal) Battery Voltage (DC) 12 V Output Voltage (AC) 230 V Output Power (Continuous) 3500 W Output Power (Peak) 4000 W (10 S) Output Waveform Pure Sine DC Charge Rate (A 100 A Peak) Yes Configurable 510 x 230 x 190 mm Dimensions 27 kg If you require power assist, parallel connection, three phase output functions or any other enhanced combi features then this range is not for you.
-

5,112.00 د.إ, excl. 5% VATInstruction Manual PDF Product Information PDF High Voltage Protection Device (HVPD) We recommend purchasing the HVPD and using it with Combi install if you are plugging our Combi into a generator or an unpredictable AC voltage Automatic, High Voltage Protection Device, with unit stop and extra information transmit port. For protecting equipment from generator / inverter over voltage failure. 30 Amp model suitable for direct use with up to 6KVA generators. Unlimited gen set / inverter capacity a
-

6,294.00 د.إ, excl. 5% VATInstruction Manual PDF Product Information PDF High Voltage Protection Device (HVPD) We recommend purchasing the HVPD and using it with Combi install if you are plugging our Combi into a generator or an unpredictable AC voltage Automatic, High Voltage Protection Device, with unit stop and extra information transmit port. For protecting equipment from generator / inverter over voltage failure. 30 Amp model suitable for direct use with up to 6KVA generators. Unlimited gen set / inverter capacity a
-

114.00 د.إ – 1,794.00 د.إPrice range: 114.00 د.إ through 1,794.00 د.إ, excl. 5% VATThe problem: Most boats suffer badly from unreliable tank level gauges, this is a particular problem with dirty water tanks. The main problem is the corrosive nature of the salt water in the tank and the fact that float meters are damaged in the tanks. The solution: The measuring device must not be effected by the movement or the corrosive nature of the fluid it is measuring. The best way to achieve this is the way ships and other quality tank meters work by using pneumatics. This has always pro